'Shiv Kashi' Plot No 20, Vivekanand Society, Tilak Nagar, Aurangabad (MS) 431005, India.
mktg.indotech@gmail.com
+91 240 2353261 / 2320039
+91 8055812141, +91 9850260111
'Shiv Kashi' Plot No 20, Vivekanand Society, Tilak Nagar, Aurangabad (MS) 431005, India.
mktg.indotech@gmail.com
Viscosity Reducer & Crystalizing Aids

VISCORED 8020

Indotech Organics is a manufacturer of sugar industry chemicals like mill sanitation, Juice Clarification, Color Precipitants, Anti-scalent for evaporator, Viscosity Reducer and Crystalizing Aids, Enzymes for Sugar Industry

VISCORED 8020 is a special additive designed to improve sugar industry operations. Its use can increase sugar yield and lower molasses purity, improve purging, reduce pan boiling and centrifugation time, improve massecuite fluidity, speed graining and form sharper crystals.

Dosage: 3 to 5 ppm of cane crushed depending upon the extent of contamination.

Application:Use 1 to 1.5 kg VISCORED 8020 additive for 40 MT each of ‘A’ and ‘B’ massecuite. The product should be dispersed in 5 to 10 liters of water and added to the boiling pan in three shots. One at the start of boiling pan, one when the strike is approximately 2/3rd of its volume and the final application about 10-15 minutes before closing the feeding for brixing up.
Use 0.5 kg to 1 kg of VISCORED 8020 per 40 MT of ‘C’ massecuite. Disperse it in 5 to 10 liters of water. Add half of the solution at the start of boiling and balance half just before dropping massecuite.

Use for Crystallizers: Make a solution of 2 kg of VISCORED 8020 in 200 liters of water.

Batch Crystallization: Add this 200 liters per 40 MT of massecuite. If more fluidity is required for better purity at lower temperature, part of the solution should be dripped on the massecuite just as it enters the ‘C’ mixer.

Continuous Crystallization: Add the solution constantly at the center of the stem where the massecuite has reached its lowest temperature. Add the solution at a rate of 200 liters per 40 MT of massecuite.

Storage: Store in a cool and dry place on the wooden pallet away from direct sunlight. Avoid contact with eyes or prolonged contact with skin. In case of skin or eye contact, wash off with plenty of water and consult physician

Packing:35 kg / 50 kg HDPE carboys.

VISCORED 7010

VISCORED 7010 is a non-ionic special additive designed to improve end operations. Its uses can increase sugar yield and lower molasses impurity, improve purging, reduce pan boiling and centrifugation time, improve massecuite fluidity, speed graining and form sharped crystals.

Application: Use 1 to 1.5 kg VISCORED 7010 additive for 40 MT of each of ‘A’ and ‘B’ massecuite. The product should be dispersed in 5 to 10 liters of water and added to the boiling pan in three shots. One at the start of boiling pan, one when the strike is approximately 2/3rd of its volume and the final application about 10-15 minutes before closing the feeding for brixing up.
Use 0.5 kg to 1 kg of VISCORED 7010 per 40 MT of ‘C’ massecuite. Disperse it in 5 to 10 liters of water. Add half of the solution at the start of boiling and balance half just before dropping massecuite.

Use for Crystallizers: Make a solution of 2 kg of VISCORED 7010 in 200 liters of water. In a batch crystallizers, add 200 liters per 40 MT of massecuite if more fluidity is required for better purity at a lower temperature, part of the solution should be dripped on the massecuite just as it enters the ‘C’ mixer. In a continuous crystallization add the solution constantly at the center of the system where the massecuite has reached its lowest temperature. Add the solution at a rate of 200 liters per 40 MT of massecuite.

Storage: Store in a cool and dry place on wooden pallet away from sunlight. Avoid contact with eyes or prolonged contact with skin. In case of skin or eye contact, wash off with plenty of water and consult physician.

Standard Packing: 35 kg / 50 kg HDPE carboys.

INDOSOFT - DS

INDOSOFT - DS is a low foaming concentrated cleaning additive designed to soften the scale during cleaning. It increases the penetration power of caustic soda used for evaporator cleaning. It is very stable at high pH and high temperature. It is soluble in highly alkaline solutions of water. It is recommended for highly alkaline cleaning of evaporators and many hard surface cleaning applications.

Dosage: 20 to 25 ppm of cane crushed depending upon the extent of contamination.

Application: For sugar evaporators dosage per kg of caustic in the cleaning solution is decided upon extent of the scale formation. It can be added to caustic soda during soda boiling of evaporator bodies. Dosage can be increased or decreased in accordance with the severity of the scale.

Storage Nd Handling: Store in a well ventilated, cool and dry place on wooded pallet away from direct sunlight. Use all protective measures for handling the product.

Packing:35 kg / 50 kg HDPE carboys.

INDOSCALE DSS ACIDIC DESCALENT FOR EVAPORATOR

INDOSCALE DSS is specifically designed for use as economical and safe descaling agent to remove scale in evaporators, vacuum pans and heat exchangers of sugar industry. Its use makes most efficient use of the equipment.

Dosage: 20 to 25 ppm of cane crushed depending upon the extent of contamination.

Application:The quantity & dose of INDOSCALE DSS depends on the severity of scale and size of the evaporator equipment. It is highly effective in removing scale, rust, deposits from heating & cooling systems such as pipelines, semi-kestner, vapour cell falling film evaporators, etc. if there is organic deposits, the equipment should be cleaned with special cleaner provided by Indotech. Then flush with water and start cleaning with INDOSCALE DSS under circulation till all scale is removed. After cleaning with INDOSCALE DSS, drain and flush with fresh water and rinse with 1% caustic solution till neutral to alkaline pH is obtained. Indotech can guide and provide solution for difficult scenarios of descaling and cleaning on the case-to-case basis. Contact us for further information

Standard Packing:35 kg / 50 kg HDPE carboys.